;)
Introduced: PV11 in July 1990, PV11L in June 1991
Successor to the PV8, the PV11 advanced the conrad-johnson zero feedback approach to elicit the ultimate in dynamic contrasts and spatial information. An improved line stage circuit, incorporating two 12AU7s was introduced in the PV11. Like the PV8, the PV11 features the exclusive use of polypropylene and polystyrene capacitors throughout the audio circuits and related power supplies — no electrolytics are used, even in the main power supply input filter.
The PV11L is a line stage version of the PV11 (without phono stage).
Features:
Inputs/Outputs — Phono,Tuner, Auxiliary, Tape1, and Tape2 inputs; Rec1, Rec2, and two amplifier (Main) outputs.
Controls:
Selector, Tape 1/Tape 2, Source/Monitor, Mode (Left, Right, Stereo, Reverse, Mono), Balance, Power, and Level.
PV11L
V1 & V2: unused
V3: unused
V4: unused, V5, & V6: 12AU7
Replacement Tubes Set RT11L
Click above for technical info on this product or to purchase a replacement tube kit.
Specifications:
Gain: Phono Stage 47 dB (phono overload 200 mV at 1kHz)
Line Stage 18 dB
Distortion: less than .1% THD or IMD
Response: bandpass 2Hz to more than 100kHz
RIAA equalization: +/- .25 dB (20 to 20 kHz)
S/N Ratio: Phono Stage 78 dB below 10 mv input
Line Stage 92 dB below 2.5 volt output
Phase Response: Line Stage phase inverting, Phono Stage phase correct
Mechanical: 19" X 3" x 12.5"