Introduced in February 1984

The PV6 was a refinement of the earlier PV2ar design with improved resistor and capacitor selections. The PV6 used upgraded precision low noise resistors and polypropylene capacitors. The result was superior definition and depth of imaging. The phono section was noticeably quieter than earlier designs.

Features:

Inputs/Outputs — Phono, Tuner, Auxiliary, monitor and recording facilities for two tape decks with dubbing from Tape 1 to Tape 2. Two power amplifier (Main) outputs.

Controls:

Selector, Source/Monitor, Mode (Reverse, Stereo, Mono), Balance, Volume, & Power.

Auto-muting to suppress warm up transients.

V1: 12AX7
V2, V4 & V5: 5751
V3 & V6: 12AT7
Replacement Tube Set RT6

Click above for technical info on this product or to purchase a replacement tube kit.

Specifications:

Gain: Phono Stage 38.5 dB (phono overload 500 mV at 1kHz)
Line Stage 28.5 dB
Distortion: less than .05% THD or IMD
Response: bandpass 2Hz to more than 100kHz
RIAA equalization: +/- .25 dB (20 to 20 kHz)
S/N Ratio: Phono Stage 72 dB below 10 mv input
Line Stage 84 dB below 2.5 volt output
Phase Response: Line Stage phase correct, Phono Stage phase correct
Mechanical: 14" X 4" x 10 "