MV100 Vacuum Tube Power Amplifier

Introduced August, 1988

The MV100 vacuum tube power amplifier evolved from the Premier Four. The regulated power supplies were redesigned to improve the isolation between the input amplifier and inverter stages of the amplifier. The MV100 delivered 90 watts per channel by using two pairs of EL34 output tubes per channel.


Features: 4, 8, 16 ohm speaker taps (screw type), one pair of inputs, two plate fuses, power switch



V1 & V2: 5751
V3 & V4: 6FQ7
V5 ­ V12: 6CA7/EL34
Replacement Tube Set RT100

Click above for technical info on this product or to purchase a replacement tube kit.

Specifications:

90 watts per channel RMS at 4, 8, or16 ohms both channels driven from 30Hz to 15kHz with no more than 1% THD or IMD.
Input Sensitivity: 0.875 volts
Frequency Response: 20Hz to 20 kHz, +0, -.5 dB
Hum & Noise: 96 dB below rated power
Dimensions: 19" X 20" X 8"
Weight: 80 lbs.